The quality of leather shoes
(1) Check the upper and the shoe. After selecting the style and color of the shoes, first check whether the material used for the upper is real material and meet the requirements. To distinguish between leather and fake leather, leather, pigskin, sheepskin or other leather. The surface of the leather is smooth, with fine particles and high strength; the surface of the pigskin is relatively large and rough, and the appearance is not as good as that of cow leather; the surface of sheepskin is fine and the texture is soft. Real leather hand feels astringent, artificial leather is relatively smooth. The upper layer of the real leather upper has a tight layer of skin and leather fibers, while leather does not have only leather or synthetic materials, and has the smell of chemical raw materials. High-quality qualified upper leather should be fine, bright, the same color with the same two parts, no color, no disability. The finger presses the dough and does not loosen. The coating layer does not fall off without cracking. The material in the shoe should also be natural leather, preferably in sheep's leather. Because of the poor air permeability of the artificial leather shoes and the easy wear and tear at the back of the mouth, it is considered as low-grade shoes. The shoe lining material requires soft, soft, uniform thickness, not easy to fall off and fade.
(2) Check soles. The sole material mainly includes rubber, plastic, rubber and plastic materials, polyurethane, natural leather and so on. When purchasing, check whether the big bottom is flat and whether the pattern is clear. Use a fingernail to lightly press the sole. It should be flexible, not too hard, and not peel off. Otherwise, it is the rubber content of the sole is low, excessive use of reclaimed rubber filler, easy to break, not wearable.
(3) Check the heel. The heel should be firmly mounted and should not be deformed or loosened by hand. Middle and high heels should pay more attention to heel quality identification. The shoes can be placed flat on the counter and should be stable. The heel surface should be able to fully contact the countertop. The hands should not be shaken; the same height should be the same for both heels.
(4) check the heart. The hook is a key component that is installed between the outsole and the inner midsole of the leather shoe, and it is not visible from the outside. When purchasing, place the shoes on a firm table and press the center of the hook. The high-quality products should not be soft or deformed. On the contrary, it indicates that the quality of the shank is inferior, and the flank area of ​​the shank will be convex or concave after wearing, making the foot feel extremely uncomfortable, walking pain, affecting health, and even causing injury to the foot.
(5) Check the main heel and Baotou. The main heel is the key component of the backbone shape, which is installed between the upper surface of the heel and the shoe. The bald head is the toe shaped component and is installed between the front upper and the shoe. During the inspection, press the main heel and the baotou with your fingers. The high-quality shoes should withstand the pressure. Check the installation position with your hand in the shoes. If it is correct, if you can directly touch the main heel and the head, then the process is poor.
(6) After the quality inspection, select the shoe type and shoe size that match their foot features and try them on. The height of the outer side of the short waist shoe should be below the outer cheekbones, and the outer cheekbones must not touch the ankle, otherwise it will be difficult to move.
In addition, in the strict quality inspection of high-grade leather shoes, it is also necessary to focus on whether the upper has loose shell, cracked pulp and discoloration phenomenon, usually by pressing, top, rubbing method, "press" is the index finger and middle finger into the shoes Use the thumb of the other hand to gently press on the helper's face within two finger spacings. If there is a rough wrinkle, it will be a loose shell; "top" is the hand reaching into the shoe with the index finger and the middle finger light top help surface, if there is obvious "white flower" "Silk pattern, after the relaxation still does not disappear, it is cracked pulp;" Rub is wrapped with a white soft gauze wrapped around the index finger, on the upper surface with a moderate force back and forth dry rub five times, such as gauze stained with color, that is, fade.
Lefeng Jewelry Co., Ltd. , http://www.gz-jewelry.com