Look at how other people’s beads are
First look at how the "pasting" is formed.
To this day, there is no book devoted to the cause of the formation of "pasting". The precious woods such as red sandalwood, huanghuali and Laoshantan in our wooden beads are oily. After a long time of correct play, the fat of the beads itself is slowly leaked out, and it is slowly oxidized and fused with the air. However, it should be noted that some of the buddies used the beads to lie in the hands of the sweat for a long time, and then nodded oil, face oil, nose oil, etc., the surface of the beads formed a dark layer, so that we did not form what we said. "Bale", but a layer of old sludge.
How can wooden beads be used to make a real "pachet"?
If you want to make out the pulp, you must first choose the density of the good beads, such as the old rosewood density oil is very good. Most of the precious wood bracelets have different oil content due to the fineness of the wood. No oil is needed for the plate. Oiling can be counterproductive, wood will become black, and it will be difficult to form a patina. Using a soft cotton cloth for a while is equivalent to 5,000 mesh sandpaper polishing. If it is a small leaf rosewood bracelet, it will fade, and the color will fade or fade after one week, which is normal. Then it should be placed in a cool place to dry naturally, while the surface is evenly contacted with air to form a fine and uniform oxide protective layer. This way, over time, you will find that the surface of the beads has become smoother.
At this time, you can use the hand plate. The hand when playing the disk must be washed and dried to ensure that there is no sweat on the hand. When playing the disk, you should feel the smoothness and smoothness of the beads. If you feel the beads when you play, you must Stop playing. Be sure to plate around the hole of the bead. There is no need to have time for the dishes every day, and the beads need to rest. After 10 days, the micro-sweat hands can feel the beads have a slight sticky feeling. This is a thin layer of patina that needs to be dried. .
Smooth plate play - sticky resistance - dry - smooth disk play (keep the beads clean)
Such repeated play, the beads will have aura of luster, the well-prepared beads have a layer of glass luster, into the wood three points, this is hanging porcelain. How long does it take to wrap the wooden beads? There is no standard time depending on the hard work of playing. Remember not to get any grease, including oil on your hands.
How can Bodhi beads be able to make a real "pastry"?
The difference between Bodhi beads and wooden beads is that Bodhi beads are not afraid of oil, and they are not afraid of sweating hands, but they also pay attention to playing. There are obvious differences in methods depending on personal preferences. I am here to say something to note:
1 about oiling
Many playmates like to oil the bodhi that they just bought. If your Bodhi has the same density and is high density, you can put a little oil on it. If you are not sure about the density, it is best not to oil, because some Bodhi with poor density will invade the seed after oiling, and it will be flooded. In that case, the disc will play into a colorful bodhi.
2About new seeds
Wearing a string of first-class Bodhi is what all the friends who like Bodhi want to get. After getting it, they are eager to "color" and "hang porcelain". What should I do? Many players choose to hang around their necks. I don't deny that the hanging neck will color very quickly, but it should also be considered that seeds with poor density will be intruded by alkaline sweat. This coloring is fast, but the density of the seed black is also very fast! It turned black, but it was weak, and it was only a colorful "flower skin".
3 about polishing and hanging porcelain
Although Bodhi is a natural seed, the purpose of our play is also very clear. We must "hang porcelain" and "paint". Xingyue Bodhi is polished and the surface may leave sandpaper printed, so first polish it again. You can choose a rough bath towel or a large cloth for initial polishing, and then use a fine cotton cloth for further disc play. When the surface is bright as above, it is oxidized for a few days, and then the process of "coloring" the hand plate. At the initial stage of Vajra Bodhi, you should follow the "7-point brush, 3-point plate". The brush is kept clean and polished. The plate is naturally colored. After a certain period of time, it can be changed to "3 points brush, 7 points plate". The characteristics of King Kong itself are easy to hide dirt, so the disk needs to be cleaned with a brush constantly. At this time, you can choose a hard brush. The fastest color of King Kong is “rough grainâ€, “fine grain†is slightly slower, and “tooth grain†is the slowest.
Bodhi plate follows the road of “summer coloring, winter glazingâ€, and hopes that Bodhi enthusiasts can make their own satisfactory “pastingâ€.
100% Polyester,100% Polyster Microfiber Bedsheet,100 Polyester Microfiber Sheets,100% Polyster Microfiber Bedsheet
ZHEJIANG HUIDE NEW MATERIAL CO.,LTD , https://www.zjhuide-microfiber.com